액세서리

Toradex는 최종 제품에 직접 사용할 수 있는 상용 액세서리를 제공합니다. 일부 액세서리의 경우, 조립 도면, 회로도 및 Altium 프로젝트를 포함한 설계 파일이 제공됩니다. 이러한 설계 파일은 애플리케이션별 요구 사항에 맞춘 맞춤형 액세서리의 설계를 쉽게 할 수 있도록 도와줍니다.

결과: 41개 제품 중 1-20개
  보기
  • Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis T30
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX8
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis Evaluation Board and Ixora Carrier Board
  • Compatible with Apalis iMX6Q, Apalis iMX6D, Apalis iMX6Q IT and Apalis iMX8
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
  • 1x Tactile switch to enter Apalis iMX6 module recovery mode
  • 1x Tactile switch to reset Apalis iMX6 module
  • MIPI CSI-2, MIPI DSI, LVDS and CAN-FD
  • Tactile Switches for Reset and Recovery
  • Compatible with Verdin AM62P
  • 4 screws (M2x10mm) included with each heatsink for easy mounting to Verdin Carrier Boards
  • Compatible with Verdin iMX95, iMX8M Mini, iMX8M Plus and AM62
  • 4 screws (M2x10mm) included with each heatsink for easy mounting to Verdin Carrier Boards
  • Compatible with Aquila AM69
  • 4 screws (M3x18mm) included with each heatsink for easy mounting to Aquila Carrier Boards
  • Compatible with the SMARC iMX8M Plus and the SMARC iMX95
  • 6 screws (M2.5x8mm) included with each heatsink for easy mounting to SMARC Carrier Boards and Modules
  • Compatible with Aquila iMX95
  • 4 screws (M3x18mm) included with each heatsink for easy mounting to Aquila Carrier Boards
  • Compatible with Zinnia Carrier Board
  • Buit-in Heatsink
  • Compatible with Ivy Carrier Board
  • 1 Fastener bag contains 100 Fasteners
  • Touch: 4-Wire Resistive Touch
  • 40 pin FFC cable (250mm) to connect it with a Carrier Board
  • No special drivers required
  • 40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board
  • Atmel touch driver
  • LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board
  • 34 Pins 0.5 mm FFC Ribbon Cable (150 mm) to connect with a Carrier Board
Have a Question